Install Chassis Into Rack Or Cabinet - Dell Z9000 Installing

Follow these steps to attach the brackets to the chassis:
Step Task
Take the brackets and screws out of their packaging.
1
Attach the brackets to the sides of the chassis on either side, using four screws for each bracket. Attach the bracket
2
so that the "ear" faces to the outside of the chassis.
View from I/O side

Install chassis into rack or cabinet

Ensure that there is adequate clearance surrounding the rack or within the cabinet to permit access and
airflow. Follow the steps below to install a switch into a two-post 19-inch equipment rack, using the
already attached mounting brackets.
Step Task
Dell Force10 recommends that one person hold the Z9000 chassis in place while another attaches the brackets to
1
the posts.
18 | Install the Z9000
Connect to
rack/cabinet
(ears)
View from PSU side
Connect to
rack/cabinet
(ears)
Screws