Change Supervisor Or User Password - EPOX EP-61BXC-A User Manual

EP-61BXC-A
DMA1: This field selects the routing of DMA1 for the ECP mode.
DMA3: This field selects the routing of DMA3 for the ECP mode.
4-8 Change Supervisor or
User Password
To change the password, choose the "SUPERVISOR PASSWORD or USER
PASSWORD" option from the CMOS SETUP UTILITY menu and press [Enter].
NOTE: Either "Setup" or "System" must be selected in the "Security
Option" of the BIOS FEATURES SETUP menu.
1. If CMOS is corrupted or the option was not used, a default password stored
in the ROM will be used. The screen will display the following message:
Enter Password:
Press the [Enter] key to continue after the proper password is given.
2. If the CMOS is corrupted or the option was used earlier and the user wishes
to change the default password, the SETUP UTILITY will display a mes-
sage and ask for a confirmation.
Confirm Password:
3. After pressing the [Enter] key (ROM password if the option was not used)
or current password (user-defined password), the user can change the
password and store new one in CMOS RAM. A maximum of 8 characters
can be entered.
BIOS
Page 4-23