Pnp/Pci Configuration - EPOX EP-61BXC-A User Manual

BIOS

4-5 PNP/PCI Configuration

The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ
signals when various PCI/ISA cards are inserted in the PCI or ISA slots.
WARNING: Conflicting IRQ's may cause the system to not find certain devices.
PNP OS Installed
Resources Controlled By
Reset Configuration Data
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
DMA-7 assigned to
PNP OS Installed: Do you have a PNP OS installed on your system. The default is
No.
Yes: Select if you are using a PNP OS
No: Select if your OS does not support PNP.
Resources Controlled By: Who controlled the system PNP/PCI resources.
The default is Manual.
Manual: PNP Card's resources will be controlled manually. You can set
which IRQ-X and DMA-X are assigned to PCI/ISA PNP or Legacy ISA
Cards.
Auto: If your ISA card and PCI card are all PNP cards, BIOS will assign
the interrupt resource automatically.
Reset Configuration Data: This setting allows you to clear ESCD data.
The default is Disabled
Page 4-16
ROM PCI/ISA BIOS(2A69KPA9)
PNP/PCI CONFIGURATION
AWARD SOFTWARE, INC.
: NO PCI IDE IRQ Map To
: Manual Primary IDE INT#
: Disabled Secondary IDE INT#
: Legacy ISA Used MEM base addr
: Legacy ISA
: PCI/ISA PnP Assign IRQ For USB
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
Esc : Quit
: PCI/ISA PnP
F1 : Help
: PCI/ISA PnP
F5 : Old Values
: PCI/ISA PnP
F7 : Load Setup Defaults
Figure 6: PCI Configuration Setup
EP-61BXC-A
: PCI-AUTO
: A
: B
: N/A
: Enabled
: Select Item
é é é é é ê ê ê ê ê è
è è è è ç ç ç ç ç
PU/PD/+/- : Modify
(Shift) F2 : Color