Chipset Features Setup - EPOX EP-61BXC-A User Manual

BIOS

4-3 Chipset Features Setup

Choose the "CHIPSET FEATURES SETUP" in the CMOS SETUP UTILITY
menu to display following menu.
Auto Configuration
EDO DRAM Timing
EDO CASx# MA wait state
EDO RAS Wait State
SDRAM CAS LATENCY Time
DRAM Data Integrity Mode
System BIOS Cacheable
Video BIOS Cacheable
Video RAM Cacheable
8 Bit I/O Recovery Time
16 Bit I/O Recovery Time
Memory Hole At 15M-16M
Passive Release
Delayed Transaction
AGP Aperture Size (MB)
Auto Configuration: This selects predetermined optimal values of the chipset
parameters.
The default is Enabled.
Enabled: This enables auto-configuration and provides the option to select
predefined timing modes.
Disabled: This allows the user to specify DRAM timing parameters.
Note: If you exceed the performance characteristics of memory in your
system it will result in lockups, crashes and other problematic system
operations.
EDO DRAM Speed Selection: This value must correspond to the speed of the
DRAM installed in your system.
The default is 60ns. This item is for EDO DIMM in Pentium
only.
Page 4-8
ROM PCI/ISA BIOS(2A59IPAB)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: Enabled Auto Detect DIMM/PCI Clk
: 60ns Spread Spectrum Modulated
CPU Warning Temperature
: 2 Current cpu Temperature
: 2 Current System Temp
: 3 Current PWR SUP FAN Speed
: Non-ECC Current CPU FAN Speed
: Enabled Current Chiassis FAN Speed
: Enabled Vcore
: Enabled Vio
: 1 +12V
: 1 -5V
: Disabled
: Enabled
: Disabled
: 64
Esc : Quit
F1 : Help
F5 : Old Values
F7 : Load Setup Defaults
Figure 4: Chipset Features Setup
EP-61BXC-A
: 2.08 V Vtt
: 3.36 V +5V
: 12.28 V -12V
: 5.20 V
é é é é é ê ê ê ê ê è
è è è è ç ç ç ç ç
PU/PD/+/- : Modify
(Shift) F2
®
II processor at 66MHz
: Enabled
: Enabled
: 60C/140F
: 31C/87F
: 31C/87F
: 0 RPM
: 5578 RPM
: 0 RPM
: 1.55 V
: 5.16 V
: 11.90 V
: Select Item
: Color