Error Messages - Furuno GP-280 Operator's Manual

11.16 Error Messages

Radar error messages appear at the left-hand side of the display as below. To erase the error
message display, press the [CLR] key.
Radar Signal Error
Trigger Error
Antenna Rotation Error
Bearing Signal Error
Heading Data Error
Log Error
Error Message
Radar Signal Error
Trigger Error
Bearing Signal Error
Antenna Rotation Signal Error
Heading Data Error
Log Error
Radar Board Error.
Power off and Check Please.
11-34
Radar error messages
No radar signal.
No trigger signal.
Bearing signal not received at RADAR Board. Check that antenna
switch is on. Also check RADAR Board.
Radar antenna is not rotating. If it is rotating the problem may lie with
the connector on the RADAR Board.
No heading data from heading sensor.
No speed log signal from speed log.
This message appears when there is something wrong with the RADAR
Board. Contact a FURUNO agent for assistance.
Meaning