Current (Tide) Alarm - Furuno GP-280 Operator's Manual

6.6 Current (Tide) Alarm

The current alarm is released when the speed of the current layer selected is higher or lower
than the preset current speed, depending on alarm type selected. The current alarm requires
current indicator data input to function.
1. Press [MENU], [5], [1] to display the Alarm menu.
2. Select 2 from the Page field at the top of the screen.
Alarm

Page 1 2

Currrent
Alarm
Sel. Layer
Speed
Alarm
Wake-up
Time
Timer
Time

↑↓←→ : Sel, Fix
MENU : Esc
3. Select In RNG or Out RNG from the Current field as appropriate.
4. Press [↓], enter alarm range (0.1-999.9 knots) and press the [ENT] key.
5. Select current layer (1 to 3) to use from the Sel. Layer field.
6. Press the [MENU] key several times to close the menu.
6.6.1 Canceling the current alarm
When the current alarm sounds, press the [CLR] key to silence the audio alarm. To cancel the
alarm set Current on page 2 of the Alarm menu to Off.
6-10
Off
In RNG Out RNG
000.0 ~ 000.0 kt
1
2 3
Off
In RNG Out RNG
000.0 ~ 000.0 kt
Off Set
00H00M
One Alarm Off Repeat Alarm
00H00M