1800 Rpm Generator - Pre-Twin Ll (Type Nos. Below 1100) - Briggs & Stratton Twin Cylinder L-Head Repair Manual

1800 RPM Generator – Pre-Twin ll
(Type Nos. Below 1100)
1. Disconnect governed idle spring and start engine.
Turn speed regulating nut to obtain 1850 RPM,
Top-No-Load RPM, Fig. 45.
2. Stop engine.
3. Reinstall governed idle spring and start engine.
4. Bend governed idle tang to obtain 1875 RPM.
Top-No-Load RPM, Fig. 46.
14
4
Fig. 45 – Adjust Low Speed
INCREASE
DECREASE
INSTALL GOVERNOR SPRING IN #3 HOLE
Fig. 46 – Adjust High Speed
SPEED
REGULATOR
NUT
INCREASE
ADJUSTING
KNOB