Flywheel Fan And Retainer (Type Nos. 1100 & Above); Stop Switches - Briggs & Stratton Twin Cylinder L-Head Repair Manual

2
Flywheel Fan And Retainer
TORQUE
SCREWS
(Type Nos. 1100 & Above)
The fan and retainer do not need to be removed unless
fan or retainer is damaged or warped.
FAN
RETAINER
To remove fan, remove two fan retainer screws, fan
retainer and fan.
To install fan, place fan on to flywheel, aligning recess
in flywheel with boss on back of fan. Install fan retainer
and screws, Fig. 30.
FAN
Torque screws to 150 in. lbs. (17.0 Nm).
BOSS
RECESS
Fig. 30 – Installing Fan

STOP SWITCHES

Various key and toggle stop switches have been
provided by the Briggs & Stratton Corporation to meet
various equipment manufacturers needs, Fig. 31.
SINGLE TERMINAL SINGLE TERMINAL
TOGGLE ROTARY KEY
MULTIPLE TERMINAL
ROTARY KEY
MULTIPLE TERMINAL
TOGGLE
Fig. 31 – Stop Switches
11