Playback W Ithout Using The Menu Playback Function (In Case Of A P.b.c.-Compatible Vcd) (To P.b.c. On Or Off); Selecting The Audio Channel - Kenwood DV-502 Instruction Manual

34
M enu playback
Playback w ithout using the menu playback function (In case of a P.B.C.-compatible VCD)
(To P.B.C. On or Off)
Press the TOP M ENU key on the remote control unit.

Selecting the Audio channel

VCD
You can choose to play back only the right or the left channel of audio recorded on the disc, or you can select
stereo playback. This function is used for purposes such as selecting the vocal track on a Karaoke disc.
During VCD playback, press AUDIO key on the
remote.
Downloaded from: http://www.usersmanualguide.com/
TOP MENU
AUDIO
÷ For the track numbers, refer to the disc jacket or other material.
÷ P.B.C. off mode : Without using menu playback function.
P.B.C. off mode
PBC
Goes off
To return to menu playback
Press the TOP M ENU key again.
P.B.C. on mode
PBC
Lit
Each press the key sw itches the mode.
1 STEREO
2 LEFT
3 RIGHT
DV-502/DVF-3050 (EN/K,P,T,M ,X)