Programmed Playipgm Mode); Playing Desired Tracks In Desired Order - Kenwood DP-R895 Instruction Manual

Programmed play (PGM mode)
The program mode allows you to play desired tracks in the order you want to hear them, A maximum of 32 selections can
be entered in memory.
Playing desired tracks in desired order
r.
^ Press the STOP key.
ft
2 Enter the PGM mode.
I PGM] indicator lights up.
G @ 0 ®
2 Program desired tracks in desired order.
Example: Select track 5 on DISC 4.
(X) Select the disc.
DISC 1 DISC 2 DISC 3 DISC 4 DISC B
(-r I I n .
(2) Select the track number.
( I J
b
(J) Press the iP.MODEl key.
Blir\ks
Track number
• When selecting tracks using the numeric keys on the remote
control of the amplifier/receiver, the iP.MODEj key does not have
to be pressed after the tracks have been selected.
• 8y repeating steps (D,® and
(D,
up to 32 tracks may be selected,
if "FULL* is displayed and no further programming can be ac¬
cepted. .
« If you made a mistake, press the ICLEAR] key and select the
correct track. _
• By pressing the iP.MQDEj key without selecting track numbers,
all the tracks on the disc selected in step®will be programmed.
Lights up.
P-0 !
Start playback.
• If one of the skip keys Ior ) is pressed durirvg
programmed playback, the track being played is skipped in the
forward or reverse direction.
To check the programmed order
IP.C-I indicator lights up
CHECK
I
ft
Cso TWACK MC
301 P- IP
Display showing program No. 12, DISC 3,
track No, 7.
• Every time the ICHECKlkey is pressed, the track No. and the
order it was programmed (P-No.} are displayed in the order of
programming,
• The previous display will resume in a few seconds,
To resume normal playback
The playback in the order of the track Nos. on CD wilt start after
the track being played.
To stop programmed playback
'h
j
8 DP*R895(EnJ