Repeated Playback (Repeat Mode); To Repeat Only The Desired Tracks; To Repeat One Selected Disc - Kenwood CD-224M Instruction Manual

Repeated playback
18
Preparation

To repeat only the desired tracks

To repeat one selected disc

For random repetition
For music type repetition
For best selection repetition
Downloaded from: http://www.usersmanualguide.com/
(REPEAT mode)
÷ Load discs into the carousel.
1 Program the desired tracks by per-
forming steps 1 to 3 of "Program-
ming tracks in desired order".
2 Sw itch REPEAT ON.
REPEAT
3 Start playback.
6
1 Check that the unit is in the normal
play TRACK mode.
2 Select the disc number.
∞ DISC SKIP 5
Previous disc Next disc
Within 8 seconds!
3 Start playback.
6
4 Sw itch REPEAT ON.
REPEAT
0
: Keys and controls used in the operations described on this page.
÷ Up to 32 tracks can be programmed by repeating steps 1 .
^
P G
÷ The current status is displayed w hen the key is pressed once. When it
is pressed w hile the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
÷ All of the programmed tracks w ill be repeated.
÷ In case only one track is programmed, only that track w ill be repeated.
To cancel repeated playback
Press the REPEAT key tw ice. (REPEAT ON → OFF)
#
÷ The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
P G
÷ The current status is displayed w hen the key is pressed once. When it
is pressed w hile the status is displayed, the repeat ON status can be set
to OFF (or vice versa).
To cancel repeated playback
Press the REPEAT key tw ice. (REPEAT ON → OFF)
(
§
•
Programming tracks in desired order (PGM mode)
R E P E A T 2 O N
R E P E A T 2 O N
CD-2 2 4 M / DPF-J5 0 1 0 (En)
D T 3 0
D T 3 0