Inked Ribbon Cartridge; Interfaces; Sensors; Power Supply - DCA Intertel 2000 Technical Manual

5.4 Inked Ribbon Cartridge

-type
-color
-duration

5.5 Interfaces

5.6 Sensors

-paper end
-Top Of Form

5.7 Power Supply

-voltage range
-current drain
ON LINE, not printing
standby (selec. by SW1-8)
printing

5.8 Environmental Limits

-operating conditions
temperature
relative humidity
(not condensing)
-non operating conditions
temperature
relative humidity
(not condensing)
DCA Intertel
snap-on cartridge
black/purple
purple: 1.2 x 106 characters
temperature: 5° + 50°C
black: 0.7 x 106 characters
temperature: 10° + 50°C
TTL logic serial level (baud rate 1200/2400/4800/9600)
RS-232C serial board
Centronics parallel board
reflective sensor
reflective sensor
+10.8 + 14.0 Vdc
160 mA max
80 mA max
2 A average value
20 A peak typical (for 600 µs)
30 A peak (for 300 µs max)
peak repetition frequency 900 Hz
-5°...+40°C (+23°...+104°F)
15%...85% RH
-15°...+70°C (+5°...+158°F)
5%...85% RH
43 DCA Intertel