DCA Intertel 2000 Technical Manual page 26

ESC 2
Format:
ASCII:
decimal:
hexadecimal:
Comment:
Line spacing is set to 1/6 of an inch (4.23 mm) for subsequent line feed commands.
ESC 3 n
Format:
ASCII:
decimal:
hexadecimal:
Comment:
Line spacing is set to n/216 of an inch (1/216" = 0.118 mm) for subsequent line feed
commands. The range for "n" is from 0 to 255 (OOhex...FFhex).
ESC A n
Format:
ASCII:
decimal:
hexadecimal:
Comment:
Line spacing is set to n/72 of an inch (1/72" = 0.353 mm) for subsequent line feed
commands. The range for "n" is from 0 to 85 (00hex...55hex).
Note: When using uni A4 sheets on MP 2000 printer the minimum line spacing
pitch becomes 1/217 of an inch (0.117 mm).
This modification affects the ESC J n and ESC 3 n commands which therefore re-
spect the 1/217 inch pitch; the correct values for remaining line feed commands
are 3.16 mm (ESC 0),
2.46 mm (ESC 1), 4.21 mm (ESC 2) and 0.351 mm (ESC A n).
DCA Intertel
Set line spacing to 1/6 inch
ESC 2
27 50
1B 32
Set line spacing to n/216 inch
ESC 3
27 51
1B 33
Set line spacing to n/72 inch
ESC A
27 65
1B 41
26
n
n
n
n
n
n
DCA Intertel