Table of Contents
Advertisement
5.9 Dimensions and Weight
-dimensions
length
height
width
-weight
6. MAINTENANCE
6.1 Care and Cleaning
The MP 2000 does not require special maintenance, except for the following:
−Periodical cleaning, to the print head bearing rod with isopropylic alcohol or some-
thing similar.
−When the printer has suffered a major shock or whenever bad quality printing is
experienced, you need to measure the distance between print head and printing plate.
The distance, measured with a thickness gauge with the printer closed and no inked
ribbon interposed, should be 0.55 mm +/- 0.05 mm.
−The printers mechanism requires regular cleaning to remove any foreign matters
such as dust, paper chips etc., which can cause mechanism malfunctions.
7. WARRANTY
−The MP 2000 printer is subject to a strict factory quality control.
−This manufacturer's guarantee does not apply when improper use or non compliance
to electrical, mechanical and environmental requirements.
−Partial or complete disassembling of the printer.
−Unauthorised replacement of the electrical and/or mechanical components
−This manual provides the user with all the necessary information required to make
correct and effective use of the MP 2000 printer.
−Any comments or suggestions about our product will be very much appreciated.
−DCA policy is to pursue a continuous improvement of the quality of its products. For
this reason the technical specifications contained herein may be subject to modificati-
on without notice.
DCA
Intertel
351 mm
82 mm
83 mm
2.2 kg
44
DCA
Intertel
Advertisement
Table of Contents
