DCA Intertel 2000 Technical Manual page 39

ESC K n1 n2 d
format:
ASCII:
decimal:
hexadecimal:
Comment: Single density bit image mode is selected.
If d value represents the total number of columns:
n1 = dMOD 256
n2 = INT (d/256)
This has the same effect as "ESC" with m set to 0. It is also possible to define again
"ESC K+ to select another mode using "ESC?".
ESC L n1 n2 d
format:
ASCII:
decimal:
hexadecimal:
Comment: low speed double-density, bit image graphics mode is selected.
If d value represents the total number of colums:
n1 = dMOD 256
n2 = INT (d/256)
This has the same effect as "ESC" with m set to 1. It is also possible to define again
"ESC K" to select another mode using
"ESC?".
ESC Y n1 n2 d
format:
ASCII:
decimal:
hexadecimal:
Comment: double speed, double density bit image graphics mode is selected.
If d value represents the total number of columns:
n1 = dMOD 256
n2 = INT (d/256)
This has the same effect as "ESC" with m set to 2. It is also possible to define again
"ESC K" to select another mode using "ESC?".
DCA Intertel
select 8-bit single density bit image printing
ESC K n1
27 75 n1
1B 4B n1
select 8-bit double density bit image printing
ESC L n1
27 76 n1
1B 4C n1
select 8-bit double speed double density bit image printing
ESC Y n1
27 89 n1
1B 58 n1
39
n2 d
n2 d
n2 d
n2 d
n2 d
n2 d
n2 d
n2 d
n2 d
DCA Intertel