Table of Contents
Advertisement
5. TECHNICAL INFORMATION MP 2000
5.1 Technical Specifications
-printing housing
-printing method
-printing direction
-paper movement
-paper transport
-printing speed
-paper advance speed
-draft mode:
-NLQ and graphics mode
-Continuous line
feeding ex formfeed
-buffer capacity
-MCBF
-expected head life
-vibration test:
3 axis sinusoidal
vibration test at
resonance frequency
3-200 Hz random vi-
bration (MIL-STD-
810D/514.3)
-shock test
(non-operational mode)
DCA
Intertel
Caged enclosure(for EMI suppression)
3 parts made of 1 mm Stainless Steel
Dampingpads for noise suppression
dot matrix impact printing (ballistic, 9 pins)
horizontal, bi-directional
printing with optimum path, logic search
forward/backward
friction and tractor
150 char/s in draft mode
150 ms/line typical (1/6" line spacing)
200 ms/line typical with intermittent paper advance
(1/16" line spacing)
100 ms/line = 0.6 s/inch = 4.35 cm/s typical
2 KBytes
1.2x106 lines
300x106 strokes/needle, equal to 190x106 characters
(given an average density of 14 dots/character).
0.5 G for 15 min. along each axis
1 G for 30 min. along each axis
50 G for 8ms along each axis
41
DCA
Intertel
Advertisement
Table of Contents
