Table of Contents
Advertisement
Connecting Wires to Terminals
FM/AM antenna input
If no connections are made, do not let the wire come out from the tab.
When using the optional power amplifier, connect to its
power control terminal.
Depending on what antenna you are using, connect either
to the control terminal of the motor antenna, or to the
power terminal for the booster amplifier of the film-type
antenna.
Connect to the terminal that is grounded when
either the telephone rings or during conversation.
To connect the Kenwood navigation system, consult
your navigation manual.
To "EXT.AMP.CONT. " terminal of the amplifier having
the external amp control function.
40
|
English
AUX left input (White)
AUX right input (Red)
Front left output (White)
Front right output (Red)
Fuse (10A)
To car light control switch
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key switch
Car fuse box
(Main fuse)
Battery
Power control wire (Blue/White)
Motor antenna control wire (Blue)
TEL mute wire (Brown)
External amplifier control wire
(Pink/Black)
Dimmer control wire (Orange / White)
White/Black
White
Gray/Black
Gray
Green/Black
Green
Purple/Black
Purple
Car fuse box
ACC
Ground wire (Black) · (To car chassis)
Sub Woofer left output (White)
Sub Woofer right output (Red)
Rear left output (White)
Rear right output (Red)
To Kenwood disc changer/
External optional accessory
To connect these leads, refer to the
relevant instruction manuals.
Wiring harness
(Accessory1)
Ignition wire (Red)
Battery wire (Yellow)
Advertisement
Table of Contents
