Table of Contents
Advertisement
Installation
non-Japanese cars
Metal mounting strap
(commercially available)
Firewall or metal support
Self-tapping screw
(commercially available)
Screw (M4X8)
(commercially available)
• Make sure that the unit is installed securely in place. If
the unit is unstable, it may malfunction (for example, the
sound may skip).
• To attach this unit, make sure the front of the control
panel faces you and fit it into the mounting sleeve by
pressing the four corners of the hard rubber frame at the
same time.
Do not apply strong pressure to other sections than the
corners; otherwise troubles such as the impossibility of
opening or closing the panel may result.
Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
Japanese cars
Accessory6
Factory-installed
(follow indications for L/R)
Radio Bracket
L
Factory trim bezel
8mm
3
5mm
Accessory3...for Nissan car
Accessory4...for Toyota car
• Damage to the unit will result from using screws other
than those provided.
• A pair of J-Car Brackets (Accessory 6) are not used when
fitting in a Toyota car.
Factory-installed
Radio Bracket
R
Accessory7
(place thick part on bottom)
8mm
4
5mm
|
English
41
Advertisement
Table of Contents
