Table of Contents
Advertisement
In Standby mode
Date Adjustment
1
Select Date Adjust mode
Push the knob towards [FM] or [AM].
Select the "Date Adjust" display.
2
Enter Date Adjust mode
Press the Control knob for at least 1 second.
The date display blinks.
3
Selecting the item (day, month, or year) to
adjust
Push the Control knob towards [4] or
[¢].
The items that are blinking are items that you
can adjust.
4
Adjust each item
Push the Control knob towards [FM] or [AM].
5
Repeat step 3 and 4 operation and adjust the
date.
6
Exit Date adjustment mode
Press the [MENU] button.
In Standby mode
Date Mode
Setting the date format.
1
Select Date Mode
Push the Control knob towards [FM] or [AM].
Select the "Date Mode" display.
2
Select the date format
Push the Control knob towards [4] or
[¢].
3
Exit Date mode
Push the Control knob towards [FM] or [AM].
In Standby mode
Dimmer
Dimming this unit's display automatically when
the vehicle light switch is turned ON.
Display
Setting
"Dimmer:ON"
The display dims.
"Dimmer:OFF"
The display doesn't dim.
In Standby mode
OFF Wait Time Setting
Setting the time until the faceplate hiding
operation starts after the power is turned OFF.
You can only remove the faceplate during the set
time period.
Display and Setting
"Off Wait:0sec"
"Off Wait:3sec" (Original setting)
"Off Wait:25sec"
In Standby mode
Built-in Amp Setting
Controlling the built-in amplifier.
Turning OFF this control enhances the preout
quality.
Display
Setting
"AMP:ON"
The built-in amplifier activates.
"AMP:OFF"
The built-in amplifier deactivates.
Other than Standby mode/
When the Dual Zone System is ON
Dual Zone System Setting
Setting the Front channel and Rear channel
sound in the Dual Zone System.
Display
Setting
"Zone2:Rear"
Sub source (Auxiliary input source) is to be rear
channel.
"Zone2:Front"
Sub source (Auxiliary input source) is to be front
channel.
31
|
English
Advertisement
Table of Contents
