Menu system
In Standby mode
Contrast Adjustment
Adjusting the display contrast.
Display and Setting
"CONT 1"
"CONT 6" (Original setting)
"CONT 11"
In Standby mode
Manual Clock Adjustment
1
Select Clock Adjustment mode
Push the Control knob towards [FM] or [AM].
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the Control knob for at least 1 second.
3
Adjust the hours
Push the Control knob towards [FM] or [AM].
Adjust the minutes
Push the Control knob towards [4] or
[¢].
4
Exit Clock adjustment mode
Press the [MENU] button.
In Standby mode
Switching preout
Alternating the preout between the rear and
subwoofer. (With the subwoofer the sound
outputs without being effected by fader control.)
Display
Setting
"SWPRE R"
Rear preout.
"SWPRE SW"
Subwoofer preout.
24
|
English
In Standby mode
Opening Demonstration
Setting the Demonstration when Power is turned
ON.
Display
Setting
Demonstration is carried out when Power is
"Open ON"
turned ON.
Demonstration is not carried out when Power
"Open OFF"
is turned ON.
In Standby mode
Built-in Amp Setting
Controlling the built-in amplifier.
Turning OFF this control enhances the preout
quality.
Display
Setting
"AMP ON"
The built-in amplifier activates.
"AMP OFF"
The built-in amplifier deactivates.
In Standby mode
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
Display
Setting
"AUX OFF"
When selecting the source there's no Auxiliary Input.
"AUX ON"
When selecting the source there's Auxiliary Input.
Function of the DPX-MP4090/DPX-MP4090S
In Standby mode
CD Read Setting
When there is a problem with playing a CD with
special format, this setting plays the CD by force.
Display
Setting
"CD READ 1"
Play CD and Audio file.
"CD READ 2"
Play CD by force.
• Setting "CD READ 2" cannot play Audio file.
Some music CDs may not play even in the "CD READ
2" mode.