Illumination Color Setting; Contrast Adjustment; Dimmer - Kenwood 00271-13000 Instruction Manual

Menu system

Illumination Color Setting

You can set the display to a desired color.
1
Select Illumination Color Setting Mode
Press the [FM] or [AM] button.
Select the "COL" display.
2
The color continues to change gradually
Continue pressing the [4] or [¢] button.
Release your finger at the color you want.
Quick call up the preset color
Press the [#1] — [#4] button.
Button
[#1]
[#2]
[#3]
[#4]
Selecting the Color mode
Press the [#6] button.
Each time the button is pressed the Color mode switches as
shown below.
Display Color mode
"Scan" The color changes in sequence.
"SRC" The color changes according to the selected source.
"Time" The color changes every 6 hours.
Keeps the presently set color.
Blue fine adjustment
1 Press the [#3] button for at least 2 seconds.
2 Press the [4] or [¢] button.
When the blue fine adjustment is completed, press the [#3]
button.
Color
Silky White
Red
Blue
Blue Green
— 24 —
The set color memory
Press the [#5] button for at least 2 seconds.
When the setting in the memory is called up press the [#5]
button.
The blue fine adjustment setting cannot be stored in memory.

Contrast Adjustment

Adjusting the display contrast.
Display and Setting
"CONT 0"
"CONT 5" (Original setting)
"CONT 10"

Dimmer

Dimming this unit's display automatically when the vehicle light
switch is turned ON.
Display
"DIM ON"
"DIM OFF"
Setting
The display dims.
The display doesn't dim.