Ascanner Vac To Vdc Conversion (Optional) - Datalogic DX8200A Reference Manual

SCANNER CONVERSION
A SCANNER VAC TO VDC CONVERSION (OPTIONAL)
It is possible to convert the DX8200A VAC model into a VDC model by inserting an internal
jumper.
The following operation should be performed by qualified personnel only.
CAUTION
Before unscrewing the panel of the DX8200A, make sure the power
supply cable is disconnected to avoid shock or harm to the operator.
WARNING
Follow the procedure below:
1. Unscrew the Display and Keypad panel screws to open the scanner.
2. Carefully remove the panel as shown in Figure 66.
Figure 66 - Opening the DX8200A
A
75