Model Description; Indicators - Datalogic DX8200A Reference Manual

INTRODUCTION

1.3 MODEL DESCRIPTION

The DX8200A scanner is available in versions that differ depending on the interface
connection, the optical resolution and on the input power type:
Communication Type:
0 = Standard version
1 = Ethernet version
2 = Profibus version
3 = DeviceNet version

1.4 INDICATORS

The DX8200A has five LEDs on the rear panel.
The indicators have the following functions:
POWER ON (green)
PHASE ON* (yellow)
ENCODER* (yellow)
TX DATA (green)
NETWORK (red)
* These LEDs are always OFF when the DX8200A works as Slave.
DX8200A - 3 X Y Z
Indicates the scanner is turned on.
Indicates the external presence sensor is active.
Indicates the external encoder signal is active.
Indicates data transmission both on the main and on the auxiliary
interface.
Indicates the Lonworks network is functioning correctly. This LED is
normally ON.
Power:
0 = VDC
1 = VAC
Optical Resolution:
1 = Medium resolution
2 = High resolution
3 = Very High resolution
1
3