Sony KP-57WV600 Operating Instructions Manual page 93

- if your TV does not turn on, and a red light keeps flashing, your TV may
need service. Call your local Sony Service Center.
Make sure the powes
cord is
plugged in.
Press the POWER button on the front of the TV.
Press the TVIVIXXXI button to cycle through the connected video sources.
Try another channel;
it
could be station trouble.
Adjust
the Pitture
option in the Video
Menu (see page 72).
Adjust the
Uriqhmess
option in
the
Video Menu (see page 72).
Check the antenna/cable connections.
Adjust the Color option in the Video Menu (see page 72).
Check the antenna/cable connections.
Try another channel; it could be station trouble.
Press ANT to change the input mode (see page 48).
Adjust the antenna.
Move the TV away from noise sources such as cars,
neon
signs,
or
haiF
dryers.
Using a highly directional outdoor antenna or a cable may solve the
problem.
You have
selected
a text option in the Setup Menu and no text js available.
(See page 83 to reset Setup selections.) To turn off this feature, set the
Captiori Vision option to OH. If
you
were trying to select closed
captioning,
select CC1 instead 0f'fEXI I -4.
No picture
(screen not lit), no sound
Dark, poor or no
picture (screen lit),
good sound
No color
Only snow and noise
appear on the screen
Dotted lines
or stripes
Double images or ghosts
"Black box" on screen
Black bands appear at the
top and bottom of the screen
Certain programs on DVD or B
other digital sources display
a loss of detail, especially
during fast-motion or dark
scenes
Some wide-screen programs are filmed in aspect ratios that aye greater
than 16:9 (this
is
especially common with theatrical releases). Your TV will
show these programs with black bands at the top and bottom of the screen.
For more details, check the documentation that came with your DVD (or
contact
your
program provider).
The compression used by certain digital broadcasts and
DVT)s may
cause
your TV's screen to display less detail than usual, or cause artifacts (small
blocks or dots, pixelations) to appear on your screen. This is due to you]
TV's large screen and ability to show very fine detail, and is normal fool
certain digitally recorded programs. Adjust the reality/clarity in the DRC
Palette menu (see page 73) to optimize the picture while viewing these
sources.