Customer Information - Sony KP-57WV600 Operating Instructions Manual

If, after reading these
operating imkuc~ions, you
Irave additional
q~mtions
related to the use of your Sony iefevisiort, please call oarr
Customer information
Services Center at 1 -BOO-222433NB' (7669) (US
residents only) or (416) 49Y-SONY (7669) (Camdian residents only).
If you are having prol,lems with
your TV, you can reset all the 'T'V'S
settings to their original factory default settings, as follows.
I cannot get TCn View to
12 If you are using a cable box to unscramble all channels (as shown on
work
u
u
There is no Twin View u
window, or it is just static
u
Twin View cannot display
L-1
anything but TV channels
%n View displays the same 0
program in both windows
page Y&l), you cannot use the
Twin View
feakxre. This is because the cable
box can unscramble only one channel at a time. But if you need the cable
box to unscramble only some
(usually
prrmium) channels,
you can we
Twin .View for unscrambled channels if you connect both a cable and cable
box, as shown on page 22.
You can use Twin View to view a signal from a different source that is
connected to the
TV's A/V jacks (such as a
VCR or DVD player) in i-he
second window by pressing the '~~/V~l9~~ button while in Twin View.
Sources connected to the AUX, VlDEO 5, VXDEO 6, and VIDEO 7 inputs
display in the
left
Twin View window, but not the right.
Re
sure
the Twin View window is set to a video input or
&and
that 1~s a
signal airing.
You might be tuned to a video inpait with nothing connected to it. Try
cycling through
the
video inputs by pressing
the 'Y/VIBE6~
butimn.
If
you
connected equipment to the
'W's
ACJX jack, it will display irt the Ml
Twin View window, but not the right.
Try cycling throublgh the video inputs by
pressing
the
~V/V~~~~~~
button.
Check that the Vi&o I.ahel option is not set to Skip. (See the Setup Menu on
page 84.)
Both Twin View windows might be set to the same channel. Try c-hanging
channels in either window.