Sony KP-57WV600 Operating Instructions Manual page 78

/j#j If /1:3 D&l& is set to
anything but Off, the Wide Mode
setting rhanges only for the
current channel. When you
change channels (or inputs),
Wide Mode is aukomatically
replaced with ihe 4:3 Default
setting. .r0 retain the current
Wide Mode setting as channels
and inputs are changed, set 4:3
Default to Off,
Select to enlarge the 4:3 size picture, while
the upper and lower parts of the picture are
condensed to fit the wide screen.
Select to return the 4:3 picture to normal
mode.
Full Select to enlarge the 4:3 picture
horizontally only, to fill the wide screen.
7oom
seiect
to enlarge the 4:3 picture
horizontally and vertically to an equal
aspect ratio i-hat fills the wide screen.
Off Select to continue using the current Wide
Mode setting when the channel or input is
changed.
Allows you to move the posit-ion of the picture up and
down in the window. (Available only in Wide Zoom and
Zoom modes.)
Move the joystick Z or 6 and press @ to choose a
correction between +'I5 and -15 (Zoom mode), and i-10
and -10 (Wide Zoom mode).