Sony KP-57WV600 Operating Instructions Manual page 36

Watch the satellit-e receiver
W&cl 1 the VCR
Set up the 'r"V remote cc@01
to operate the satellite
recei\wr or VCR
Activnlc t1w 'TV remote
colttrol to operate the satellite
wceiver or VCR
Contml satellite receiver and
VCR h~cti.ons with the TV
remote control
Label video inputs to easily
identify equip merit connected
to IhC TV
Press TV/Vl~~~~ repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR may need to be turned on and se{- to the satellite receiver input.
Press ~\/~~~~)~~~~ repeatedly to select the input to which the VCR is connected
(VlDEO 1 jn the illustralkn).
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See "l'rograinming the Remote Control" on pages 51-52
For the satellite receiver, press ~~~/~~~I..~~ 1:~~~~'~~~~~. For the VCR, open the
outside cover, as s1~ow1~ on page 50. Then set the A/V slide switch to the
position you pwgrammcd for the VCR.
See "Operating a Satellite Receiver" on pqe 53 and "Operating a VCR" on
page 53.
See the instrwtions for setting up Video Labels on pages 83-64.