Sony KP-57WV600 Operating Instructions Manual page 3

lns~llin~
0 To prevent internal heat buildup, do not block the ventilation
openings.
D Do not install the projection TV in a hot or humid ylace, or in
a place subject to excessive dust or mechanical vibration.
B Avoid operating the projection TV at temperatures below 5°C
(W'F).
a If the projection TV is transported directly from a fold to a
warm location, or if the room temperature changes suddenly,
the picture may be blurred or show poor color due to
moisture condensation. In this case, please wait a few hours
to let the moisture evaporate before turning on the projection
TV.
131 To obtain the best pichtre, do not expose the screen to direct
illumination or direct sunlight. It is recommended to use spot
lighting directed down from the ceiling or to cover the
windows that face the screen with opaque drapery. It is
desirable to install the projection TV in a room where the
floor and walls are not of a reflective material.
ENEKGY STAR* is a U.S. registered mark.
TruSurround and th
Inc. TruSurround te
SRS Labs, Inc.
symbol are trademarks of SRS Labs,
y is incorporated under IicelBe from
BBE and BBE Symbol are trademarks of BBE Sound, Inc. and are
licensed by BBB Sound, Inc. under U.S. Patent No. 4,6X258 and
4,482,866.
Steady Sound, Digital Reality Creation, Caption Vision,
CineMotion, Memory Stick, and Twin View are registered
trademarks of Sony Corporation. ClearEdge VM, HD Detailer, and
Uniform Brightness Screen are trademarks of Sony Corporation.
The model and serial numbers are located at the rear of the
projection TV, below the Sony logo, on the sticker, and also on the
TV box (white label). Record these numbers in the spaces provided
below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No.
Serial No.