Sony KP-57WV600 Operating Instructions Manual page 52

The remote control is preset to operate Sony brand video equipment.
Beta, Et-i Beta VCRs AVI
303
8 In111 VCR
AV2
302
\JHS VCR
AV3
301
DVD player
DVD 751
If you have video equipment other than Sony brand that you want to
control with the TV's remote control, use the foIlowing procedure to
program the remote control.
1 Turn to the list of
"Manufacturer's Codes" on
page 52, and find
the three.digit code number for the manufacturer of your
equipXl~l-.
(If more than one code number is listed, use the
number listed first.)
2 Open the remote controol and set the h/V slide switch to I, 2, 3, 01
SW.
1% Press 6:ODI WI:
& Enter the three-digit manufacturer's code number.
ii ,.ii Press I:NI'EK
fi To check if the code number works, aim the TV's remote control
at the equipment and press the ~'~~~~~~ button that corresponds
with that equipment. If it res~?onds, you
are done.
If not, try using
another code listed for that manufacturer.
NoPcs
o If more than one code number is listed, try entering them one by
one until you come to the
correct
code for your eqLlipme~t.
K! If you
enter
a new code number, the code number you. previously
entered at that setting is erased.
Cl In some cases, you may not bc able to operate your equipment
with the supplied remote control. In such cases, use the
equipment's own remote control unit.
-2 Whenever you remove the batteries to replace them, the code
numbers may revert to
the factory
setting and must be reset.