Sony KP-57WV600 Operating Instructions Manual page 29

a&h this ~:~~~~~I~~~~~~~ ysu mffi:
3 Use the TV remote control to shange channels coming through
the cable box. (You must first program the remote contd for
your specific cable box; see "Progp.amminl, * the Remol e con brol"
on page 51.)
U Use the TV remote control to change channels coming directly
into the TV's V~~/.~~~~ jack. (The TV's tuner provides a bet&
P;igrtnl than the cable box.)
i.3 Resd channels coming through the cal9le box ad clrannels
coming directly into the TIT
'Ib suam??ct the wx md LSL16p hE<
I Connect the C&W cable to the single (input) jack of the splitter.
2 PJse a coaxial cable to connect one of ihe splitter':; two outp~rt
jacks to the TV's VHF/UHF jack.
3 Use a coaxial cable to connect the splitter's other output jack to
the cable box's input jack.
4 Use a coaxial cable to co~uzect the cable box's output jat,k to the
VCR's RF inyut jack.
5 Use an A/V cable to connect the VCR's A/V output jacks tc~ fhe
TV's A/V input jacks.
6 Run the Auto Setup program, as described in "Setting 1Jp the
Channel List" on page 4.3.