Glp Print; Reset - OHAUS AV412 Instruction Manual

EN-34

3.7.10 GLP Print

Select GLP items to be printed by setting them to
On.
Time
Balance ID
User ID
Project ID
Difference
Name
End GLP Prt
End GLP Print
Press the Yes button to advance to the reset
submenu. Press the No button to return to Time.

3.7.11 Reset

Setup
Readout
Mode
Unit
Print-1
Print-2
RS232-1
RS232-2
GLP Data
GLP Print
Lockout
Global
RESET?
End Reset
Setup
Select Yes to return all Setup menu items to their
factory settings.
Readout
Select Yes to return all Readout menu items to
their factory settings.
Mode
Select Yes to return all Mode menu items to their
factory settings.
GLP PRINT
On/Off
On/Off
On/Off
On/Off
On/Off
On/Off
RESET
RESET?
RESET?
RESET?
RESET?
RESET?
RESET?
RESET?
RESET?
RESET?
RESET?
RESET?
Unit
Select Yes to return all Unit menu items to their
factory settings.
Print-1
Select Yes to return all Print-1 menu items to
their factory settings.
Print-2 (If COM2 is installed)
Select Yes to return all print-2 menu items to
their factory settings.
RS232-1
Select Yes to return all RS232-1 menu items to
their factory settings.
RS232-2 (If COM2 is installed)
Select Yes to return all RS232-2 menu items to
their factory settings.
GLP Data
Select Yes to return all GLP Data menu items to
their factory settings.
GLP Print
Select Yes to return all GLP Print menu items to
their factory settings.
Lockout
Select Yes to return all Lockout menu items to
their factory settings.
Global
Select Yes to return the menu items in all sub-
menus to their factory settings.
End Reset
Press the Yes button to advance to the Lockout
menu. Press the No button to return to Setup.
Adventurer Pro