Sealing Access To The Balance Settings; Printing Data - OHAUS AV412 Instruction Manual

EN-36

3.9 Sealing Access to the Balance Settings

When used in conjunction with the Lockout menu, the balance may be sealed to prevent or detect
unauthorized changes to the balance settings. For legal for trade applications, the balance must
be sealed to prevent access to the metrological parameters.
To seal the balance, cover the Lock switch access hole at the rear of the balance. A paper seal, and
a wire seal may be installed as shown.
To regain access to the locked balance settings, break the seal and press the
recessed Lock switch momentarily while OHAUS is displayed during power up.
3.10

Printing Data

Printing data to an external computer or printer requires that the communication parameters in the
RS232-1 and/or RS232-2 submenus be set to match external device communication parameters.
04/01/05 12:30 PM
Bal ID 1234567
USER ID ABCDEFGHIJ
PROJ ID 1234567890
Name....................... // If GLP SET > Name is ON
0.0200kg G
0.0200kg T
0.0000kg NET
0.0200kg G
Sealing the Balance
Wire Seal Paper Seal
Rear of the Balance
// if GLP SET> Time is ON
// If GLP SET> Balance ID is ON
// If GLP SET> User ID is ON
// If GLP SET> Proj ID is ON
// If a tare value is entered, these three items are printed if selected in the definitiion string.
// Gross ON - G, B or [space] as determined in Readout submenu.
// Tare ON
// Net ON
// Otherwise, gross is printedif selected in the definition string.
// Gross ON - G, B or [space] as determined in Readout submenu.
Adventurer Pro
Lock Switch
(Under Seal)