Button Control Functions - OHAUS AV412 Instruction Manual

Adventurer Pro

3.2 Button Control Functions

Four multifunction buttons are used to to operate the balance and navigate the menus. The
function of each button is shown below.
Yes
On/Zero
Primary
• If balance is off,
Function
turns balance on.
• If balance is on,
sets zero.
Secondary
Function
• Turns balance off.
Menu
Function
• Accepts the
current (blinking)
setting on the
display.
No
• Sends current
display value to
the serial
interface.
Off
• Change
weighing unit.
Yes
• Rejects the
current setting
(blinking) on the
display.
• Increments a
value being
entered.
Back Exit
Print
• Operation is
dependent on the
application
mode.
Unit
Mode
• Change
application
mode.
No
• Reverts back to
previous menu
item.
• Decrements a
value being
entered.
Press and Release
Press and Hold
Menu Function
Function
• Performs tare
operation.
• Enter the User
menu.
Calibration is the
first sub-menu.
Back
• Immediately
exits menu mode.
• Aborts a
calibration in
progress.
EN-13
Tare
Menu-Cal
Exit