Overview Of Parts And Controls; Control Functions - OHAUS Courier 3000 Instruction Manual

Courier 3000

1.3. Overview of Parts and Controls

1
2
Item
1
2

1.4. Control Functions

Button
If the scale is off, short press to turn on the scale.
When the weight on the platform is less than or
equal to 2% of the Capacity value, a short press will
zero the instrument display.
Primary
Function
When the weight on the platform is greater than 2%
(Short Press)
of the Capacity value, a short press will set the tare
weight.
During the calibration, short press this button to
capture the zero and the linearity calibration points.
In Display Hold mode, short press this button to
clear the reading shown on the instrument display.
Secondary
Function If the scale is on, long press to turn off the scale.
(Long Press)
NOTE:
• Short Press: Press the key less than 3 seconds.
Long Press: Press and hold the key for more than 3 seconds.
•
Figure 1-1 Courier 3000
Description Item
Front housing 3
Control panel 4
Figure 1-2 Courier 3000 Control Panel
On/Zero
Off
Description
Load cell cable connector
Power port
Enter/exit the hold mode.
Changes the weighing unit.
Long press two buttons to enter
the calibration mode.
EN-3
3
4
Units/Hold
Cal