Example Program - Crestron DigitalMedia DM-TX-200 Operations & Installation Manual
Cat transmitter 200
Hide thumbs
Also See for DigitalMedia DM-TX-200:
- Operations & installation manual (32 pages) ,
- Quick start manual (2 pages)
Table of Contents
Advertisement
DigitalMedia™ CAT Transmitter 200
Program Manager
18 • DigitalMedia™ CAT Transmitter 200: DM-TX-200
"Device Settings: Crestron DM-TX-200" Window
•
The ID code specified in the SIMPL Windows program must match the IP
ID of each unit. Refer to "Identity Code" on page 13
Program Manager is the view where programmers "program" a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Example Program
An example program for the DM-TX-200 is available from the Crestron website
(www.crestron.com/exampleprograms).
Crestron DM-TX-200
Operations & Installation Guide – DOC. 6741B
Advertisement
Table of Contents
Need help?
Do you have a question about the DigitalMedia DM-TX-200 and is the answer not in the manual?