Crestron DigitalMedia 8G+ Transmitter 200 Operations & Installation Manual
  1. Manuals
  2. Brands
  3. Crestron Manuals
  4. Transmitter
  5. DigitalMedia 8G+ Transmitter 200
  6. Operations & installation manual
Crestron DigitalMedia 8G+ Transmitter 200 Operations & Installation Manual

Crestron DigitalMedia 8G+ Transmitter 200 Operations & Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Crestron DM-TX-200-C-2G-FLOOR/
DM-TX-200-C-2G-WALL
DigitalMedia 8G+™ Transmitter 200
Operations & Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DigitalMedia 8G+ Transmitter 200 and is the answer not in the manual?

Questions and answers

Related Manuals for Crestron DigitalMedia 8G+ Transmitter 200

Summary of Contents for Crestron DigitalMedia 8G+ Transmitter 200

  • Page 1 Crestron DM-TX-200-C-2G-FLOOR/ DM-TX-200-C-2G-WALL DigitalMedia 8G+™ Transmitter 200 Operations & Installation Guide...
  • Page 2 Crestron, the Crestron logo, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, DM 8G+, and QuickSwitch HD are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Dolby Digital and the double-D symbol are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.

  • Page 3: Table Of Contents

    Further Inquiries ......................31 Future Updates ......................31 Return and Warranty Policies ....................32 Merchandise Returns / Repair Service ..............32 CRESTRON Limited Warranty................. 32 GNU General Public License ....................33 Contents • i Operations & Installation Guide – DOC. 7255B...

  • Page 5: Digitalmedia 8G+™ Transmitter 200: Dm-Tx-200-C-2G-Floor/Dm-Tx-200-C-2G-Wall

    1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide (Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc. 4789) for complete system design guidelines. The manuals are available from the Crestron Web site at www.crestron.com/dmresources. All cable sold separately.
  • Page 6 3. Power over DM (PoDM) requires connection to a DM 8G+ PoDM power sourcing device. 4. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or STP.
  • Page 7 DigitalMedia allows you to take control of each device in the system as you like. 1. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or STP.

  • Page 8: Application

    Power over DM (PoDM) for a true one-wire solution.* An array of indicators on the front of the DM-TX-200-C-2G provides for easy setup and troubleshooting. Advanced configuration is enabled through Crestron Toolbox software. PoDM requires connection to a DM 8G+ PoDM power sourcing device.

  • Page 9: Specifications

    Specifications for the DM-TX-200-C-2G are listed in the following table. DM-TX-200-C-2G Specifications SPECIFICATION DETAILS Video Switcher 2x1 combination digital/analog switch, ® Crestron QuickSwitch HD Input Signal Types HDMI, DVI , DisplayPort Multimode RGB, component (YP , S-video (Y/C) , composite...
  • Page 10 DigitalMedia 8G+™ Transmitter 200 Crestron DM-TX-200-C-2G-FLOOR/WALL DM-TX-200-C-2G Specifications (Continued) SPECIFICATION DETAILS Video Input Resolutions (Continued) HDMI & DVI, Interlaced 720 x 480 @ 30 Hz (480i) 720 x 576 @ 25 Hz (576i) 1920 x 1080 @ 25 Hz (1080i25)
  • Page 11 Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 DM-TX-200-C-2G Specifications (Continued) SPECIFICATION DETAILS Audio Switcher 2x1 combination digital/analog switch Input Signal Types HDMI, DisplayPort Multimode , analog stereo Output Signal Type DM 8G+ Formats ® ® Dolby Digital , Dolby Digital EX, DTS...
  • Page 12 1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cable sold separately. 2. The RGB input can accept component, composite, and S-video signals via direct interface to Crestron MPS Series products, or through an appropriate adapter (not included). Input sync detection is not provided for composite or S-video signal types through the RGB connection.

  • Page 13: Physical Description

    4789) for complete system design guidelines. All cable sold separately. 4. Either a power pack or PoDM—but not both—can be used to power the DM-TX-200-C-2G. 5. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE following these footnotes.
  • Page 14 DigitalMedia 8G+™ Transmitter 200 Crestron DM-TX-200-C-2G-FLOOR/WALL DM-TX-200-C-2G-WALL Physical Views (Front with and without Faceplate) DM-TX-200-C-2G-WALL Physical View (Rear) 10 • DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL Operations & Installation Guide – DOC. 7255B...
  • Page 15 Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 DM-TX-200-C-2G-FLOOR Overall Dimensions (Top, Front, and Side Views) Top View Front View 3.50 in (89 mm) 4.12 in (105 mm) 3.50 in (89 mm) Side View 2.26 in (58 mm) 2.76 in 2.7520 (70 mm) 2.10 in...
  • Page 16 DigitalMedia 8G+™ Transmitter 200 Crestron DM-TX-200-C-2G-FLOOR/WALL DM-TX-200-C-2G-WALL Overall Dimensions (Top, Front, and Side Views) Top View Front View (Shown with Faceplate) 3.50 in (89 mm) 4.70 in (120 mm) 4.70 in (120 mm) Side View 2.26 in (58 mm) 2.76 in (70 mm) 2.10 in...
  • Page 17 Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 DM-TX-200-C-2G-FLOOR Connectors, Controls & Indicators (Front and Rear Views) Front View Rear View DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL • 13 Operations & Installation Guide – DOC. 7255B...
  • Page 18 DigitalMedia 8G+™ Transmitter 200 Crestron DM-TX-200-C-2G-FLOOR/WALL DM-TX-200-C-2G-WALL Connectors, Controls & Indicators (Front and Rear Views) Front View (Shown without Faceplate) Rear View 14 • DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL Operations & Installation Guide – DOC. 7255B...
  • Page 19 Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 Connectors, Controls & Indicators CONNECTORS, DESCRIPTION CONTROLS & INDICATORS PWR LED (1) Green LED, indicates operating power supplied via PoDM or power pack RESET (1) Miniature recessed push button for hardware reset AUDIO IN (1) 3.5 mm TRS mini phone jack;...
  • Page 20 1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cable sold separately. 2. The RGB input can accept component, composite, and S-video signals via direct interface to Crestron MPS Series products, or through an appropriate adapter (not included). Input sync detection is not provided for composite or S-video signal types through the RGB connection.
  • Page 21 Brown 6. PoDM requires connection to a DM 8G+ PoDM power sourcing device. 7. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or STP.

  • Page 22: Setup

    IP-based devices. For information specifically related to Ethernet connectivity using DigitalMedia devices, refer to the latest version of the Crestron IP Considerations Guide for the IT Professional (Doc. 4579), which is available from the Crestron Web site (www.crestron.com/dmresources).

  • Page 23: Installation

    Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 Installation To prevent overheating, do not operate the DM-TX-200-C-2G in an area that exceeds the environmental temperature range listed in the table of specifications. DM-TX-200-C-2G-FLOOR The DM-TX-200-C-2G-FLOOR is designed to fit a 2-gang opening in a 6 inch Installation (153 mm) deep floor box (not included).
  • Page 24 DigitalMedia 8G+™ Transmitter 200 Crestron DM-TX-200-C-2G-FLOOR/WALL DM-TX-200-C-2G-WALL The DM-TX-200-C-2G-WALL installs in a 2-gang electrical box (not included) in Installation an insulated wall, floor, or ceiling. A minimum mounting depth of 2.5 inches (64 mm) is required. NOTE: Before installing the DM-TX-200-C-2G-WALL in an electrical box, verify that the required wiring has been fed through the electrical box.

  • Page 25: Hardware Hookup

    Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 Hardware Hookup Make the necessary connections as called out in the illustrations that follow this paragraph. Refer to “Network Wiring” on page 18. NOTE: Hardware connections to the DM-TX-200-C-2G-FLOOR are illustrated below. Connections to the DM-TX-200-C-2G-WALL are the same as those for the DM-TX-200-C-2G-FLOOR.
  • Page 26 UTP or STP. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide (Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.

  • Page 27: Programming Software

    Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron Web site. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at www.crestron.com/support.
  • Page 28 3. If necessary, double click a device to open the “Device Settings” dialog box and change the IP ID. “Device Settings: Crestron DM-TX-200-C-2G” Dialog Box NOTE: The ID code specified in the SIMPL Windows program must match the IP ID of each unit. Refer to “Identity Code” on page 18.
  • Page 29 Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 Program Manager Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View.

  • Page 30: Uploading And Upgrading

    1. Establish communication between the PC and the DM switcher as described in the latest version of the DigitalMedia Switchers Operations Guide (Doc. 6755). 2. Use the Device Discovery Tool in Crestron Toolbox to find the IP address of the DM-TX-200-C-2G. The tool is available in Toolbox version 1.15.143 or later.
  • Page 31 To establish USB communication between the PC and the DM-TX-200-C-2G via a DM switcher: 1. Use the Address Book in Crestron Toolbox to create an entry using the expected communication protocol (USB). When multiple USB devices are connected, identify the DM switcher by entering “DM-MD8X8”, “DM-MD16X16”, or “DM-MD32X32”...

  • Page 32: Firmware

    For details on upgrading, refer to the Crestron Toolbox help file. Check the Crestron Web site to find the latest firmware. (New users may be required to register to obtain access to certain areas of the site, including the FTP site.) To upgrade the DM-TX-200-C-2G firmware: 1.

  • Page 33: Ip Configuration

    NOTE: If the DM-TX-200-C-2G is connected to a DM switcher, the IP table entry of the DM-TX-200-C-2G is created automatically. 1. Use the Device Discovery Tool in Crestron Toolbox to find the IP address of the DM-TX-200-C-2G. Then, display the “System Info” window (click icon) and select the DM-TX-200-C-2G entry from the Address Book.

  • Page 34: Problem Solving

    Improper grounding. Check that all ground functionality due connections have been made to electrostatic properly. discharge. NOTE: For more advanced diagnostics, use the DMTool in Crestron Toolbox. 30 • DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL Operations & Installation Guide – DOC. 7255B...

  • Page 35: Reference Documents

    Crestron Web site (www.crestron.com) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron Web site (www.crestron.com/onlinehelp) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.

  • Page 36: Return And Warranty Policies

    Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures.

  • Page 37: Gnu General Public License

    Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 GNU General Public License Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed.
  • Page 38 DigitalMedia 8G+™ Transmitter 200 Crestron DM-TX-200-C-2G-FLOOR/WALL 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
  • Page 39 Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein.
  • Page 40 Crestron Electronics, Inc. Operations & Installation Guide – DOC. 7255B 15 Volvo Drive Rockleigh, NJ 07647 (2032216) Tel: 888.CRESTRON 10.11 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.

This manual is also suitable for:

Dm-tx-200-c-2g-floorDm-tx-200-c-2g-wall

Table of Contents