Confirmation/Setting The Fuser Power Supply; Displaying Fuser Heater Temperature - Kyocera FS-C8520MFP Service Manual
Hide thumbs
Also See for FS-C8520MFP:
- Operation manual (388 pages) ,
- Driver manual (102 pages) ,
- Quick installation manual (32 pages)
Table of Contents
Advertisement
Item No.
Confirmation/setting the fuser power supply
U169
Description
Displays and settings the specification of fuser power supply for checking.
Purpose
To check or set the specification of fuser power supply after replacement of the fuser power sup-
ply.
Method
1. Press the start key. The specification of fuser power supply is displayed.
Mode
Setting
1. Change the setting using the cursor left/right keys or numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Displaying fuser heater temperature
U199
Description
Displays the detected fuser temperature.
Purpose
To check the fuser temperature.
Method
1. Press the start key. The current setting is displayed.
Fix Press
Fix Edge
Fix Center
Completion
Press the stop key. The screen for selecting a maintenance mode No. is displayed.
Display
Specification of fuser power supply
(1: 100V , 2: 200V , 3: 120V )
Display
Press roller center temperature (°C)
Heat roller edge temperature (°C)
Heat roller center temperature (°C)
Description
Description
Description
1-3-63
2MY/2MZ
Hide quick links:
Advertisement
Table of Contents
