Kyocera FS-C8520MFP Service Manual page 203

Code Contents
Drum motor K steady-state
2201
error
The rated speed signal
detected the stability OFF
continuously for 1 s after the
drum motor K stabilizes.
Drum motor YCM steady-
2202
state error
The rated speed signal
detected the stability
OFFcontinuously for 1 s after
the drum motor YCM
stabilizes.
2211 Drum motor K startup error
Drum motor K is not stabilized
within 2 s since the motor is
activated.
2212 Drum motor YCM startup
error
Drum motor YCM is not stabi-
lized within 2 s since the
motor is activated.
Causes
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector. Drum motor K and engine PWB (YC3)
Defective drive Check if the rollers and gears rotate
transmission sys- smoothly. If not, grease the bushings and
tem. gears. Check for broken gears and replace if
any.
Defective motor. Replace the Drum motor K.
Defective PWB. Replace the engine PWB and check for cor-
rect operation (see page 1-5-32).
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector. Drum motor YCM and engine PWB (YC3)
Defective drive Check if the rollers and gears rotate
transmission sys- smoothly. If not, grease the bushings and
tem. gears. Check for broken gears and replace if
any.
Defective motor. Replace the Drum motor YCM.
Defective PWB. Replace the engine PWB and check for cor-
rect operation (see page 1-5-32).
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector. Drum motor K and engine PWB (YC3)
Defective drive Check if the rollers and gears rotate
transmission sys- smoothly. If not, grease the bushings and
tem. gears. Check for broken gears and replace if
any.
Defective motor. Replace the Drum motor K.
Defective PWB. Replace the engine PWB and check for cor-
rect operation (see page 1-5-32).
Defective connec- Reinsert the connector. Also check for conti-
tor cable or poor nuity within the connector cable. If none,
contact in the con- replace the cable.
nector. Drum motor YCM and engine PWB (YC3)
Defective drive Check if the rollers and gears rotate
transmission sys- smoothly. If not, grease the bushings and
tem. gears. Check for broken gears and replace if
any.
Defective motor. Replace the Drum motor YCM.
Defective PWB. Replace the engine PWB and check for cor-
rect operation (see page 1-5-32).
1-4-15
Check procedures/
corrective measures
2MY/2MZ