(2) Secondary transfer roller section
The secondary transfer roller section consists of the secondary transfer roller mounted to the paper conveying
unit and the separation needle. To the secondary transfer roller, DC bias is applied from the high voltage PWB
(HVPWB). The toner image formed on the transfer belt is transferred to the paper by the potential difference.
Paper after transfer is separated from the drum by applying separation charging that is output from the high
voltage PWB (HVPWB) to the separation electrode.
1. Secondary transfer roller
2. Separation needle holder
3. Paper chute guide
Separation needle
Figure 2-1-19 Secondary transfer roller section block diagram
3
Figure 2-1-18 Secondary transfer roller section
FUPS
Separation bias
Transfer bias
Transfer roller
4. Separation needle
5. Fuser pre sensor
HVPWB
YC1-12
YC1-14
YC1-15
2-1-15
2MY/2MZ
5
2
4
1
ROOP
YC5-5
EPWB
HVREM
YC15-B6
T2CNT
YC15-B4
SCNT
YC15-B3