Kyocera FS-C8520MFP Service Manual page 377

Check procedure & check point
No. Content
1) Replace the main board and check function.
An error is detected at the
F46X 2) Retrieve the USBLOG
Print image process section
(or retrieve the print capture data by case)
1) Format the HDD and check function. (U024 FULL formatting) (*1)
F47X
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
An error is detected at the function.
Image edit process control 3) Replace the main board and check function.
F48X
section 4) Replace the HDD and check function. (*1)
5) Retrieve the USBLOG and contact the Service Administrative Division.
F49X
(*1) For the HDD standard model only.
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
F4AX
function.
An error is detected at the
3) Replace the main board and check function.
Print image process section
4) Replace the HDD and check function. (*1)
F4CX
5) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
F4DX
function.
An error is detected at the
3) Replace the main board and check function.
Entity control section
4) Replace the HDD and check function. (*1)
F4EX
5) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
An error is detected at the Job
F4FX 3) Replace the main board and check function.
control section
4) Replace the HDD and check function. (*1)
5) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
1) Format the HDD and check function. (U024 FULL formatting) (*1)
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
function.
An error is detected at the FAX
F50X 3) Replace the main board and check function.
control section
4) Replace the HDD and check function. (*1)
5) Retrieve the USBLOG and contact the Service Administrative Division.
(*1) For the HDD standard model only.
1) Format the HDD and check function. (U024 FULL formatting) (*1)
F51X
2) Execute the U021 Memory initializing to initialize the controller backup memory and check
F52X
function.
F53X
An error is detected at the Job
3) Replace the main board and check function.
execution section
F55X
4) Replace the HDD and check function. (*1)
F56X
5) Retrieve the USBLOG and contact the Service Administrative Division.
F57X
(*1) For the HDD standard model only.
Remark 1
*The F46F is printer process
error. If it repeats with a
certain print data, retrieve
the capture data and
USBLOG.
2-4-17
TASKalfa 256ci/FS-C8525MFP, TASKalfa 206ci/FS-C8520MFP,
TASKalfa 306i/FS-6530MFP, TASKalfa 256i/FS-6525MFP
2MY/2MZ-2