Table of Contents
Advertisement
3. Press the arrow buttons to adjust the position of the projected image as necessary.
1
Center of lens
2
Projected image when lens shift is set in the center
3
Maximum vertical range (V × 60%)
4
Maximum horizontal range (H × 18%)
Note: You cannot move the image to both the horizontal and vertical maximum values.
4. When you are finished, press the Esc button on the control panel or remote control.
Note: When adjusting the image height, position the image lower than where you want it to be and then
move it up. This will help prevent the image from moving down after adjustment.
Parent topic:
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
1. Turn on the projector and display an image.
Using Basic Projector Features
80
Advertisement
Table of Contents
