• Press the right arrow button to expand the distance between the lines closest to the baseline.
14. When you are finished, press Menu.
Note: If necessary, you can fine-tune the results of your Curved Surface adjustments using Point
Correction.
Parent topic:
Related references
Projector Feature Settings - Settings Menu
Related tasks
Displaying a Test Pattern
Correcting Image Shape with Point Correction
Correcting Image Shape with Point Correction
You can use the projector's Point Correction feature to fine-tune the image shape using points on a grid.
1. Press the Menu button.
2. Select the Settings menu and press Enter.
3. Select the Geometric Correction setting and press Enter.
4. Select the Point Correction setting and press Enter.
Note: If you see a confirmation message, press Enter.
Image Shape
91