Table of Contents
Advertisement
Related concepts
Projector Lamp Maintenance
Related references
Input Signal Settings - Signal Menu
Image Quality Settings - Image Menu
Projector Feature Settings - Settings Menu
Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Projector Power or Shut-Off Problems
Solutions to Problems with the Remote Control
Solutions to Password Problems
Parent topic:
Solutions to Projector Power or Shut-Off Problems
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
• Make sure the power cord is securely connected to the projector and to a working electrical outlet.
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to
turn on the projector.
• The power cord may be defective. Disconnect the cord and contact Epson.
• If the projector's lamps shut off unexpectedly, it may have entered standby mode after a period of
inactivity. Press the power button to wake the projector.
• If the projector's lamps shut off, the Status light is flashing blue, and the Temp light is orange, the
projector has overheated and shut off. Check the solutions for this light status.
• Make sure the lamps and lamp cover are installed securely.
• If the power button on the remote control does not turn on the projector, check its batteries and make
sure the Remote Receiver setting is turned on in the projector's menu, if available.
• Check to see if the projector is being controlled remotely through an RS-232 or LAN connection or a
scheduled setting.
• Make sure the ID switch on the remote control is set to Off.
Parent topic:
Solving Problems
Solving Projector or Remote Control Operation Problems
203
Advertisement
Table of Contents
