Table of Contents
Advertisement
Setting
Projection
Direction
Operation
A/V Settings
Options
Front
Front/Upside Down
Rear
Rear/Upside Down
Varying levels available
—
A/V Output
Monitor Out
152
Description
Selects the way the projector
faces the screen so the image is
oriented correctly
Selects the installation angle for
the projector; the projector's fan
may get louder depending on the
direction angle selected
See the Operation settings table
in this topic
Selects various audio and video
output settings
A/V Output: select to output
audio and video to an external
device when the projector is in
standby mode (Standby Mode
must be set to Communication
On to use this setting)
Monitor Out: select the image
source to output to an external
device when the projector is in
standby mode; when set to Auto,
an analog RGB signal from the
Computer or BNC ports is output
depending on which source was
selected when the projector went
into standby mode
Advertisement
Table of Contents
