Event ID code
0434
0482
0484
0485
0433
0481
0483
04FE
0479
04FF
0891
0892
0893
0894
0898
0899
Parent topic:
Projector Reset Options - Reset Menu
You can reset most of the projector settings to their default values using the Reset All option on the
Reset menu.
Cause and solution
Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
Cannot display the transferred images. Restart the EasyMP Network Projection
program.
Communication with computer was disconnected. Restart the EasyMP Network
Projection program.
The EasyMP Network Projection program quit unexpectedly. Check the network
communication status, then turn the projector off and then on again.
A projector system error has occurred. Turn the projector off and then on again.
Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
The WPA/WPA2 authentication type does not match. Make sure the wireless
network security settings are correct.
The TKIP/AES encryption type does not match. Make sure the wireless network
security settings are correct.
Communication with unauthorized access point was disconnected. Contact your
network administrator.
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the DHCP setting in the Network menus.
Communication error. Restart the EasyMP Network Projection program.
Projector Information Display - Info Menu
162