Connecting To A Wired Network; Selecting Wired Network Settings - Epson PowerLite Pro Z9750UNL User Manual

Connecting to a Wired Network

Selecting Wired Network Settings

Parent topic:
Related references
Projector Network Settings - Network Menu
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5e shielded cable or better.
1. Connect one end of the network cable to your network hub, switch, or router.
2. Connect the other end of the cable to the projector's LAN port.
Parent topic:
Selecting Wired Network Settings
Before you can project from computers on your network, you must select the network settings for the
projector using its menu system.
Note: Make sure you already connected the projector to your wired network using the LAN port.
1. Turn on the projector.
Using the Projector on a Network
Wired Network Projection
53