Table of Contents
Advertisement
2.19.2 1000Base-T connector (CN2, PCM-9581FG)
10/100/1000 Base-T connects to the PCM-9581FG via an adapter cable
to a 10-pin polarized header (CN2).
2.19.3 Network boot
The Network Boot feature can be utilized by incorporating the Boot
ROM image files for the appropriate network operating system. The Boot
ROM BIOS files are included in the system BIOS, which is on the utility
CD disc.
2.20 USB connectors (CN25,CN26,CN27)
The PCM-9581 board provides up to six USB (Universal Serial Bus) 1.1/
2.0 ports. This gives complete Plug and Play, and hot attach/detach for up
to 127 external devices. The USB interfaces comply with USB specifica-
tion Rev. 1.1, and are fuse protected.
The PCM-9581 support three 5 x2 pin header connector for USB0,1
(CN25), USB2,3(CN26), USB4,5(CN27). You will need an USB cable if
you use USB connectors. The USB interfaces can be disabled in the sys-
tem BIOS setup.
PCM-9581 User's Manual
24
Advertisement
Table of Contents
