Manual Lift Bed Operation - Hammerhead Charger 48V Operator's Manual

MANUAL LIFT BED OPERATION
Exercise caution while operating the manual lift bed to ensure the bed is not
released during lifting or lowering procedure. Severe injury could result if bed is
released and traps finger or other body parts.
To lift the manual lift bed, push down on the latch release handle behind the seat.
Raise the bed using handle on the side of the bed. The gas struts will assist in
raising the empty load bed and will keep the bed raised.
To lower the manual lift bed, grasp the bed handle and lower the bed to the rest
position. Be sure fingers are not trapped by the bed.
Hammerhead Charger Electric Vehicle Operator's Manual Page 15