Periodic Maintenance Schedule - Hammerhead Charger 48V Operator's Manual

P M
ERIODIC AINTENANCE
To perform service that is in this schedule but not described in this manual, contact a local
authorized service center for this vehicle.
Before Use:
Check brake operation
Check parking brake operation
Check warning device function in reverse
Check Lights, turning Signals, Horns
Check tire condition
Check overall vehicle condition
Recharge battery to full state of charge after each day's use
Tires: Exam for cuts, excessive war and pressure
Wheels: Check for bent rims, missing or loose lug nuts
Monthly Service or Every 20 Hours (includes list in weekly service above)
Front Axle: Check for damage to axle and loose or missing hardware
Shock Absorbers: Check front and rear shock absorbers for oil leakage and loose fasteners
Front Wheel Alignment: Check for unusual tire wear, align if required
Parking Brake: Check for bent/binding linkage rod.
Hardware and fasteners: Check for loose or missing hardware and components.
Semi‐Annual or Every 125 Hours (includes list in previous service above)
Direction Selector: Check for wear and smooth movements
Steering Assembly: Check for rack and pinion seal or damage or grease leakage
Rod End ball Joints: Check for excessive play, Lubricate.
Rear Axle: check for unusual noise and loose or missing mounting hardware
Annual or Every 250 Hours (includes list in previous service above)
Front wheel bearings: Check and adjust as required.
Rear Axle: Check lubricant, add lubricant (SAE 30 oil) as required
Brake: Clean and adjust. Check for brake pads linings. Check brake fluid.
Hammerhead Charger Electric Vehicle Operator's Manual
S
CHEDULE
Daily Service
Weekly Service
Page 23