Operation Controls; Start Engine; Engine Stop Button - Hammerhead SUPER 250 2008 Owner's Manual And Parts Manual

A. Operation controls
WARNING- Do not attempt to start or operate the engine until complete familiar with the
location and use of each control necessary to operate this vehicle. The operator must
know how to stop this machine before starting and driving it
a) Throttle*
!
The right foot pedal is the throttle that controls the kart speed. As the engine speed
increases above idle, the clutch automatically engages and moves the vehicle forward.
(See Fig. 1)
b) Brake
The brake is the left foot pedal (See Fig. 1). Applying pressure to the pedal slows or stops
the kart
c) Start engine
Insert the key into key-switch, turn the key
clockwise, release the key when the engine
starts. The engine will warm up within 5
minutes and the choke will close
automatically allowing operation at normal
RPM. (Warning: Don't crank the starter for
more than 5 seconds at one time).
d) Engine stop button
Important stop button test:
Before driving this vehicle, test the Engine Stop Button to ensure that it is operating
properly. With the engine running, push and hold the Engine Stop Button for two
seconds for the engine to shut down.